# Set Multiple Vertical Seam Correction Coefs

This API can be used to set the coefficients of the specified vertical seams.

# Request Path

{CLTPlatform-ip}:8086/advancedSeam/setMultiVerticalSeamSeamCoef

Replace {CLTPlatform-ip} with the corresponding IP address.
The request port is 8086.

# Protocol

HTTP

# Method

POST

# Request Parameters

Set the Content-Type of the request body to application/json.

Parameter Name	Description	Required	Type	Example
command	Command type	Yes	[string]	advancedSeam/setMultiVerticalSeamSeamCoef
data	Data	Yes	[object]
data>>verticalSeamArray	An array of vertical seam coefficients	Yes	[array]
data>>verticalSeamArray>>x	x	Yes	[int]	0
data>>verticalSeamArray>>y	y	Yes	[int]	0
data>>verticalSeamArray>>width	Width	Yes	[int]	1
data>>verticalSeamArray>>length	Length	Yes	[int]	16
data>>verticalSeamArray>>containReceiverArray		Yes	[array]
data>>verticalSeamArray>>containReceiverArray>>processorIndex	Sender index (starts from 0)	Yes	[int]	0
data>>verticalSeamArray>>containReceiverArray>>portIndex	Network port index	Yes	[int]	0
data>>verticalSeamArray>>containReceiverArray>>receiverIndex	Receiver card index	Yes	[int]	0
data>>verticalSeamArray>>seamCoefArray	Array of coefficients (flot type), which size is equal to width*height. Coefficients' range: [0.504,1.492] or 0	Yes	[array]	[1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0]

# Request Example

{
    "command": "advancedSeam/setMultiVerticalSeamSeamCoef",
    "data": {
        "verticalSeamArray": [{
            "x": 0,
            "y": 0,
            "width": 1,
            "length": 16,
            "containReceiverArray": [{
                "processorIndex": 0,
                "portIndex": 0,
                "receiverIndex": 0
            }],
            "seamCoefArray": [1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0]
        }]
    }
}

# Response

Parameter Name	Description	Required	Type	Example
command	Command type	Yes	[string]	advancedSeam/setMultiVerticalSeamSeamCoef
code	Status code	Yes	[int]	20000
message	Message	Yes	[string]	Common_Success
data	Data	Yes	[object]

# Response Example

{
    "command": "advancedSeam/setMultiVerticalSeamSeamCoef",
    "code": 20000,
    "message": "Common_Success",
    "data": {}
}

# Detailed Description

← Get Multiple Vertical Seam Correction Coefs Reset Multiple Vertical Seam Correction Coefs →